Skip to main content

Student Images from my Acrylic Resist Etching Class

I recently finished teaching a five week course in acrylic resist etching. I and my six students explored how to make hard ground, soft ground, and dry point intaglio prints using non-toxic materials, such as floor polish for a hard ground, relief ink for soft ground, soy sauce for degreasing, soda ash for a stripping solution. Some of the students were experienced printmakers, some were first time etchers, and some were first time for both. Uniformly, they each produced some spectacular prints. They were honestly better than my first efforts using these new materials, partly as a result of my long trial-and-error research into this, but mainly because of their own willingness and talent.

Here are a few images from the class. First, a hard ground with chine colle:

nontoxic printmaking hard ground etching

A couple of hard ground images mixed with drypoint:

nontoxic printmaking drypoint intaglio

A softground etching:

nontoxic printmaking soft ground etching

A hard ground:

nontoxic printmaking copper plate etching

Finally, a hand-coloured hard ground etching:

nontoxic printmaking hard ground etching hand coloured

Popular posts from this blog

Restoring my Printing Press

I've just finished restoring and assembling my large etching press -- a six week process involving lots of rust removal, scrubbing with steel wool, and repainting. Here is a photo of the same kind of press from the Chicago Printmakers Collaborative: And here is a short YouTube video of me testing the press, making sure the motor still works after nearly seven years of lying in storage:

Brancusi in Plastic

Artist Mary Ellen Croteau is showing these columns made from recycled plastic cartons and lids in the window of the Columbia College bookstore on Michigan Avenue. They are a playful homage to Brancusi's "Endless Columns", with a serious environmental message for our times: Image copyright Inhabitat.com and Mary Ellen Croteau Mary Ellen also runs a wonderful experimental art gallery in a window space in west Chicago, called Art on Armitage . I will be exhibiting a mixed media piece there during August 2012.

How to etch a linoleum block

Linoleum as a material for printmaking has been used for nearly a hundred years now. Normally, you cut an image out using special gouges similar to woodcut tools, cutting away the lino around the image you want to print. This is called relief printmaking, because if you look at the block from the side, the material that remains stands up in relief from the backing material. You then roll ink with a brayer over the surface of the block, place paper over it, and either print by hand or run it through a press. You can do complex things this way (for example, reduction linocuts), but the beauty of the process is that it is quick, simple, and direct. Incised lino block, from me.redith.com Etched lino block, from Steve Edwards A few years ago, I saw some prints that were classified as coming from etched linoleum blocks, and I loved the textures I saw in them. In the last few months, I've been trying to use this technique in my own studio, learning about it as one does these d